01-24-2014 08:00 AM - edited 03-10-2019 09:19 PM
Hi,
Just wondered was there anyway to manipulate what webauth URL is sent to a client in the redirect string. Currently my ISE sends clients the internal machine name, I was wondering if there was anyway I can change this.
I know on local webauth on the WLC you can set external URL's, does this feature exist in the ISE?
TIA
-G
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
01-26-2014 06:57 AM
In ISE 1.2 under the results for authorization, there is a checkbox below the redirect setting. I think it is called static hostname....
Thanks
Sent from Cisco Technical Support Android App
01-26-2014 06:57 AM
In ISE 1.2 under the results for authorization, there is a checkbox below the redirect setting. I think it is called static hostname....
Thanks
Sent from Cisco Technical Support Android App
01-27-2014 01:14 AM
Cheers Tarik, Indeed there is.
01-29-2014 12:11 PM
Users Are Not Appropriately Redirected to URL
Symptoms or Issue | Administrator receives one or more "Bad URL" error messages from Cisco ISE. |
Conditions | This scenario applies to 802.1X authentication as well as guest access sessions. Click the magnifying glass icon in Authentications to launch the Authentication Details. The authentication report should have the redirect URL in the RADIUS response section as well as the session event section (which displays the switch syslog messages). |
Possible Causes | Redirection URL is entered incorrectly with invalid syntax or a missing path component. |
Resolution | Verify that the redirection URL specified in Cisco ISE via Cisco-av pair "URL Redirect" is correct per the following options: •CWA Redirection URL: https://ip:8443/guestportal/gateway?sessionId=SessionIdValue&action=cwa •802.1X Redirection URL: url-redirect=https://ip:8443/guestportal/gateway?sessionId=SessionIdValue&action=cpp |
01-29-2014 12:28 PM
Hi Graham,
If you use the second interface for guest access ISE wil automatically redirect you to the IP address of that interface. If you would like to use a redirect based on a FQDN you can use the CLI command ' ip host
Best Regards,
Jan-Willem Molenaae
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide