cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

498
Views
0
Helpful
1
Replies
Highlighted
Beginner

ISE 2.3 Identity-PSK values (MAC and PSK) from SQL?

We are looking at deploying I-PSK for an IoT wireless network using ISE 2.3.  And we were wondering if there was any way we could get the values needed (Device MAC address and PSK) for the authorization policy rules out of SQL dynamically?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Assuming you are referring to ODBC, please verify that the SQL source is one supported by ISE in Table 8 Supported External Identity Sources . And, the MAB authentication needs to use such source so that ISE will retrieve the attribute used for I-PSK for each endpoint.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Assuming you are referring to ODBC, please verify that the SQL source is one supported by ISE in Table 8 Supported External Identity Sources . And, the MAB authentication needs to use such source so that ISE will retrieve the attribute used for I-PSK for each endpoint.

View solution in original post