02-18-2020 02:26 PM
Hello,
I am trying to determine the level of compatibility of ISE 2.4 with IOS XE 16.12.2 on the Catalyst 9600 platform, and I am getting conflicting answers from documentation. The ISE 2.4 Network Component Compatibility doc indicates that ISE 2.4 is compatible with 16.12.1 for the Catalyst 9600, however the Catalyst 9600 Release Notes for IOS XE 16.12.x and IOS XE 17.1.x indicate that 16.12.2 is only compatible with ISE 2.6.
Are there any reasons that these particular platforms and code versions would not integrate? Is there any documentation that I can reference that will provide confidence that an upgrade to ISE 2.6 is not necessary to rollout the Cat 9600 with 16.2.2 code?
Thanks!
Solved! Go to Solution.
02-18-2020 06:50 PM
02-18-2020 06:50 PM
02-21-2020 02:29 PM - edited 02-21-2020 02:30 PM
I would suggest you to check Cisco SD-Access 1.3.x Hardware and Software Compatibility Matrix, which suggesting IOS XE 16.12.2t for C9600.
The info in the ISE compatibility matrix is what tested by the FCS time of the particular ISE release.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide