08-08-2018 01:49 AM
Hi,
May I know when will ISE 2.4 be compatible with Cat 9300 16.6.4 image?
Based on this link: https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#supportedciscoaccessswitches it is still listed as 16.6.2, and it was tested with ISE 2.3.
Thank you.
Solved! Go to Solution.
08-09-2018 03:51 PM
Always was.
Always will be.
08-08-2018 05:40 AM
My general rule is if the switch code is in the same code train as the validated code version but is running a newer version in that train of code it should be good to go. That philosophy hasn't burned me yet.
08-08-2018 10:08 AM
08-09-2018 03:51 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide