ISE 2.4 support on SNS 3600 Series

[mdubec]

Hi,

will be ISE 2.4 version supported on SNS 3600 Series Aplliances?

Thanks

Michal

[Damien Miller]

At the moment no, it's been a hot topic. The current recommendation is to provide the feeedback to the ISE PM. Maybe with enough interest they will look at certifying it. http://cs.co/ise-feedback

https://community.cisco.com/t5/identity-services-engine-ise/sns36xx-appliances-support-in-ise-2-4/m-p/3806716/highlight/true#M24039

[mdubec]

Thank you for your help.
Michal

[Jason Kunst]

no.
ise 2.6 can work on 35xx and 36xx
2.4 requires 35xx

https://www.cisco.com/c/en/us/support/security/identity-services-engine/products-release-notes-list.html

[syadav2]

Guys, Does this not answer the question,  software version 2.4 is supported on SNS-3600.

[Damien Miller]

So what I was told more recently is that in order for 2.4 to run on the SNS-3600's, it requires a new ISO with additional drivers. That's all the public information we have. Seeing as there has been no new special 2.4 ISO released, it's still not supported and won't run on the SNS 3600's. It's still a hot topic.

2.6 will run fine on the SNS 3500's, but not the other way around. I suspect that was just a typo in the 2.4 section.

[marce1000]

 - No ; scrutinizing the page does not confirm your claim.

[peter.matuska1 · Accepted solution]

Hi,

2.4 is supported on SNS-36x5 appliances. See the modified ISO in the download section of ISE 2.4. Once installed you will need to apply patch 9.

[hslai]

Thanks, peter.matuska1, for updating this thread.

Yes, we just published the new ISO to provide this support.

[john.dejesus]

In SNS3615 can it support ISE 2.3?

[Surendra]

No it is not. AFAIK there are no plans for supporting it either.

[Surendra]

There is new ISO posted on CCO for 2.4 to support 36XX series appliances and you will have to install patch 9 on top if it. Older patches will not work with that ISO.