10-04-2018 07:30 AM - edited 10-04-2018 07:38 AM
Hello, have deployed a new 8x vISE distributed deployment on ISE 2.4 with patch 3. The nodes all all joined and in sync with the correct personas and certificates, I have checked that the services are running.
The intention is just to view profiling results, so added a bunch of switches, with device sensor configured and snmp, however not seeing any RADIUS live logs, not even failed attempts for unknown NADs.
Also, getting the below error when trying to browse Context Visibility. Certificates are installed.
Unable to load Context Visibility page. Ensure that full certificate chain of admin certificate is installed on Administration->System->Certificates->Trust
ed Certificates. If not, install them and restart application services. Exception: None of the configured nodes are available: [{#transport#-1}{iwqhsjHLTBy-hbHlQv_SsA}{IS
*ISE PAN NODE*}{/IP PAN NODE*:9300
Does anyone have any ideas?
}]
Solved! Go to Solution.
10-04-2018 09:15 AM
11-06-2018 08:21 AM - edited 06-18-2020 03:33 AM
Hello,
Update -
Ensure Reverse DNS is configured for ISE - You need to be able to resolve IPs to DNS name.
So make sure you add the DNS PTR records.
Also, from ISE CLI,
SSH into the Primary Policy Admin Node, type application configure ISE and chose the option –
Reset Context Visibility
Synchronize Context Visibility with Database
Login to ISE GUI and make sure nodes are in SYNC or resync if not.
As always recommend this work is performed during a change control window.
10-04-2018 09:15 AM
Hi,
Please contact the TAC to troubleshoot further.
Regards,
Tim
11-06-2018 08:21 AM - edited 06-18-2020 03:33 AM
Hello,
Update -
Ensure Reverse DNS is configured for ISE - You need to be able to resolve IPs to DNS name.
So make sure you add the DNS PTR records.
Also, from ISE CLI,
SSH into the Primary Policy Admin Node, type application configure ISE and chose the option –
Reset Context Visibility
Synchronize Context Visibility with Database
Login to ISE GUI and make sure nodes are in SYNC or resync if not.
As always recommend this work is performed during a change control window.
06-17-2020 02:19 PM
Thanks joshhunter, worked for me.
From CLI I had to type in command:
application configure ise
to get to the menu of options, but otherwise my context visibility is working now!
06-18-2020 03:30 AM
You're most welcome!
I'm glad that my resolution post from 2 years ago is still helping Engineers.
09-27-2021 12:43 AM
Hi,
Follow the steps mentioned in the article in order.
08-29-2024 01:08 AM
If the mentioned solution does not resolve your issue, consider using the "Reset M&T Session Database" option too...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide