We can’t get users connected to Extreme APs to work as guests. The captive portal and RADIUS are hosted on a Cisco ISE.When they connect, the portal (Hotspot, no authentication) appears and lets them in, but they can’t access the internet. Everything...
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other troubleshooting best practices.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other troubleshooting best practices.
Forum Posts
Hello! I've been having some login issues when logging into the ISE GUI. After logging in, I get the message: "Oops. Something went wrongInvalid request.Request not processed - Bad input.Please notify your administrator. If you are the administrator ...
I am repeatedly seeing High Latency for RADIUS Access-Request and Queried PIP for Entra ID for dot1x with Entra ID.Is there a clue you can share. ISE version is 3.5 P3. You see below latency value is very high. For MAB auth I do not see this much hig...
Good evening,I have several clients at remote locations that initiate a new authentication every 30–45 seconds after a successful authentication.Could this be due to latency?The TotalAuthLatency is ~500–550 and the ClientLatency is ~400–500.Sometimes...
I have an unusual issue for certain users when they are using dot1x authentication using TEAP , most of the users are working fine only certain users are not showing UserPrincipalName in their ISE log and eventually they are not matching the userAuth...
Hi all; Based on my traffic capture you can see below, my ISE 3.5 Patch 2 box wants to negotiate SMB version 2 and my AD DC accepts it and starts with SMBv2 version, although based on Cisco docs, ISE now supports SMB version 3. Any ideas? Thanks
Hi there,I am by no means an ISE expert, however I have extensive experience using Linux and Azure. I have attempted to deploy the ISE VM image using both the Portal and a Bicep template (in the Portal I use actual line breaks, in Bicep I use \n for ...
while create CSR, replacing an existing certificate on ISE
Resolved! PassiveID problems
Hi there,Im having som trouble setting up PassiveID in a new ISE install.ise version 3.4 patch 4I have 3 nodes, all of them have passiveid enabled, and i can see the service running in cli with 'sh app stat ise'in the ise passiveid-agent.log i see th...
In newer version of ISE, i cant find an option or section where i can configure device portal tags. We are using 3.3 version patch 9
Hi FolksFirst post here.My customer has an ISE2.7 installation, being replaced shortly. There are all sorts of issues with it - including the inability to backup the operational database due to some stored procedure errors. As part of the migration t...
Resolved! no sms in guest creation flow
I have a problem with my self registered guest portal, where the sms is not sent when geusts register.When i click the "Send test message" under the portal page customization it works as it should, but its not working in the actual guest flow.I can s...
Hi all,all our corporate laptops authenticates in corporate networks performing 802.1X EAP-TLS, via a user Certificate and all is working fine, we are running ISE 3.2 Patch 7.The Matching CAP profile is using "Subject - Commmon Name" for identity che...
Hi, I would like to know if it is possible to disable the "manage accounts" option for specific sponsor groups on the sponsor page. This feature would be very useful for better account management.
I generated an ISO by System Center, and I want to install by ISO the CISCO NAM and doesn´t work and I don´t know what the problem is. CISCO NAM appears in the control panel and the services.msi but it is disabled and doesn´t work. I need your help p...
