11-09-2018 09:31 AM
We are testing Posturing wired workstations, but the COA is not working...
I see the switch receive the COA:
Nov 9 17:21:16.119: RADIUS: Received from id 1646/42 10.4.37.151:1813, Accounting-response, len 20
Nov 9 17:21:36.436: RADIUS: COA received from id 15 10.4.37.151:50666, CoA Request, len 180
Nov 9 17:21:36.436: RADIUS: Unable to find client with addr 10.4.37.151, tableid 2
Nov 9 17:21:41.439: RADIUS: COA received from id 15 10.4.37.151:50666, CoA Request, len 180
Nov 9 17:21:41.439: RADIUS: Unable to find client with addr 10.4.37.151, tableid 2
Not sure why the client's addr is seen as 10.4.37.151, that is the ISE server.
Any Suggestions?
Joe
Solved! Go to Solution.
11-09-2018 11:14 AM
11-09-2018 01:38 PM
11-09-2018 09:38 AM
11-09-2018 09:48 AM
Yes...
aaa server radius dynamic-author
client 10.4.37.151 server-key 7 XXXXXXXXX
I also see this when debugging aaa coa
: COA: 10.4.37.151 client not configured. Dropping COA packet
11-09-2018 11:14 AM
11-09-2018 11:27 AM
That was it...
I have removed it before and added it...but this time I did a question mark and able to specify the VRF.
Thanks so much...
Joe
11-09-2018 01:36 PM
Everything is working as expected...I have added to more Posture Policy Requirements to the existing policy, but the client is not updating it's checks, it still only see's the original 2 required. Is there a mechanism to force the client to update the posture policy?
Thanks,
Joe
11-09-2018 01:38 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide