09-15-2023 03:12 AM
Hi
I recently upgraded from ISE 2.7 patch 7 to ISE 3.2 patch (full upgrade workflow).
Deployment is 5 node: 2 PAN and 3 PSN. Since the upgrade, I can't access the System Certificates of the other nodes in the deployment from the PAN (secondary PAN and 3 PSNs are affected).
When I click on one of the other nodes I get the error:
Error loading certificates. Node not reachable at this time. Try again later.
Nodes are operating fine and I've tried resyncing but problem persists. I came across the bug below but this doesn't seem to apply
https://quickview.cloudapps.cisco.com/quickview/bug/CSCus49148
Has anyone else come across this?
Thanks
Andy
Solved! Go to Solution.
09-15-2023 06:22 AM
Reload of primary pan resolved the issue - I can now access the System Certificates on all nodes in the deployment
Andy
09-15-2023 03:58 AM
Try clearing your cache or opening in an in-private window. Due to the many UI layout changes between 2.7 and 3.2, browsers won't display the contents properly due to caching elements from the 2.7 UI.
09-15-2023 04:22 AM
Thanks for the reply. I've tried all that with 3 different browsers. Will look at rebooting PAN later today.
Andy
09-15-2023 06:22 AM
Reload of primary pan resolved the issue - I can now access the System Certificates on all nodes in the deployment
Andy
09-18-2023 11:14 AM
Hello, clear cache of the navegator for the solution of the problema.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide