ISE and UC

[Cristobal Jimenez Priego]

hello all,

We're currently implementing Cisco Unified Communications side to side with ISE.

there is a profile set on ISE for the phones.

however we're experiencing a few issues with ISE and phone registration

I'm not the expert on ISE. I'd like to know what is the best practice for ISE when you have cisco UC as well.

any help will be greatly appreciated

thanks

Cris

[Anas Naqvi]

Hi Cris,

Following link might be helpful,

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_prof_pol.html

[aqjaved]

Please check below which will be defiantly helpful for you in  configuration of Cisco IP Phone between the Test-PC and port 5 on  Sw1 and its MAC address to the ISE

http://www.ecdos.com/sharzi/INE%20CCIE%20Security%20V4%20Technology%20Lab%20Online%20Workbook/Section%204%20Identity%20Management/ISE%20and%20MAB.pdf