ISE can support tacacs protocol

[jewfcb001]

Hi All ,

I see information below  ISE support radius protocol/RFC Standard and TACACS+  but I confuse tacacs protocol ise can support or not ? 

Radius === > Support

TACACS+ === Support 

TACACS ===== ???

[Kasun Bandara · Accepted solution]

ISE supports tacacs+. tacacs deprecated from many systems. there is no any official guide about tacacs support in ISE

[jewfcb001]

@Kasun Bandara 

Thank you for information . You mean the 3rdparty vendor also support tacacs+ protocol . 

Example . Rakus/Juniper/.....

[balaji.bandi · Accepted solution]

ISE do support RADIUS and TACACS+

regarding 3rd party as long as they are RFC complaint i do not see any issue working with ISE, for better check compatibility list to check cisco tested with 3rd part vendor.

[Kasun Bandara]

i cannot guarantee all third party vendors support this. it depends on those vendors' plans. but i found below guides.

https://www.juniper.net/documentation/us/en/software/junos/user-access/topics/topic-map/user-access-tacacs-authentication.html

https://docs.commscope.com/bundle/fastiron-08090-securityguide/page/GUID-4D81B3D0-B83B-4625-BCEC-2402B6989A07.html