08-26-2021 11:49 AM
Hello, recently we purchased a couple of the new ISE 36XX series appliances and they come with ISE3.0 from factory. We need to downgrade them to 2.4 to run some testing before going to 3.0. Is the only way to downgrade is to run process from CIMC?
Solved! Go to Solution.
08-26-2021 12:07 PM
Hi @allanc16 ,
ISE doesn't support downgrades of versions, only roll back patches. This will require a: installation via bootable USB or a re-image via CIMC.
Please take a look at: ISE Installation Guide 2.6, search for SNS Appliance Reference.
Hope this helps !!!
08-26-2021 12:07 PM
Hi @allanc16 ,
ISE doesn't support downgrades of versions, only roll back patches. This will require a: installation via bootable USB or a re-image via CIMC.
Please take a look at: ISE Installation Guide 2.6, search for SNS Appliance Reference.
Hope this helps !!!
08-26-2021 12:25 PM
Thanks Marcelo, just what I was looking for.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide