cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
755
Views
0
Helpful
1
Replies

ISE Guest Self Registration with Aruba WLC

Jason Tyler
Cisco Employee
Cisco Employee

Hi Experts

Customer would like to utilise ISE Guest Self Registration with Aruba Wireless controller

They currently have Aruba AP345 AP's and controllers 7210 / 7240 running code 8.3.0.7

 

They already have ISE 2.4

 

Is there a documented guide for setup of this process with the devices / firmware indicated above ?

 

Many thanks

Jason

1 Accepted Solution

Accepted Solutions

Jason Kunst
Cisco Employee
Cisco Employee
Cisco employees should be using the internal community (which you already posted there). Customers partners are encouraged to use this public community.

Here was my response internally.


http://cs.co/ise-guides there are aruba guides and compatibility information. Since ISE 2.2 we have updated our profiles so that most should work. Its really up to the vendor.

https://community.cisco.com/t5/security-documents/does-ise-support-my-network-access-device/ta-p/3650231

If all else fails and you don't have support for redirect or COA then you can use the auth vlan functionality since ISE 2.2

https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01000.html#concept_CDD87F6FE3A54351B27FF35316A23DA3

Lastly a google search

https://www.google.com/search?q=ise+aruba+guide&oq=ise+aruba+guide&aqs=chrome..69i57j0l3j69i60l2.2112j1j7&sourceid=chrome&ie=UTF-8

View solution in original post

1 Reply 1

Jason Kunst
Cisco Employee
Cisco Employee
Cisco employees should be using the internal community (which you already posted there). Customers partners are encouraged to use this public community.

Here was my response internally.


http://cs.co/ise-guides there are aruba guides and compatibility information. Since ISE 2.2 we have updated our profiles so that most should work. Its really up to the vendor.

https://community.cisco.com/t5/security-documents/does-ise-support-my-network-access-device/ta-p/3650231

If all else fails and you don't have support for redirect or COA then you can use the auth vlan functionality since ISE 2.2

https://www.cisco.com/c/en/us/td/docs/security/ise/2-2/admin_guide/b_ise_admin_guide_22/b_ise_admin_guide_22_chapter_01000.html#concept_CDD87F6FE3A54351B27FF35316A23DA3

Lastly a google search

https://www.google.com/search?q=ise+aruba+guide&oq=ise+aruba+guide&aqs=chrome..69i57j0l3j69i60l2.2112j1j7&sourceid=chrome&ie=UTF-8