07-10-2019 09:10 PM
Solved! Go to Solution.
07-11-2019 04:09 PM
07-10-2019 11:30 PM
Couple of this i would recommend you to check would be the DNS resolution of the FQDN you are using for guest portal in the URL and connectivity to the ISE Gig 1 from the end client over TCP port 8443. If they work during the redirection phase, i don't see why the page won't load.
07-11-2019 04:21 AM
07-11-2019 12:51 PM
Thanks, Jason. I am now using the self-signed cert, but the issue is the same. The portal will not load on int g1, however, it does work on int g0. I failed to mention that in the original post.
07-11-2019 01:14 PM
Is it activated under the portal settings? Otherwise please work through the TAC.
07-11-2019 01:30 PM
Thanks, Jason. Below is a screenshot showing the interface is activated in the portal settings. This is just an eval copy of ISE running in my home lab as I am learning ISE, therefore, I don't believe TAC is an option.
07-11-2019 04:09 PM
07-15-2019 10:59 AM
Thanks, Jason. This was just something I was trying out.
07-11-2019 12:52 PM
Thanks, Surendra. I have verified that both are working correctly.
07-12-2019 03:20 PM
I have seen instances where the portal won't load if Bond0 is not selected. Even though you're not bonding interfaces it seems to break access to the portal if not selected.
07-15-2019 11:01 AM
Thanks, Craig.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide