09-02-2013 11:07 PM - edited 03-10-2019 08:51 PM
Hello,
We have implemented BYOD with certificates with ISE 1.1.2. After registering the device and installing the certificates for the devices, a network profile is applied that makes the susequent connections to the same ssid use EAP-TLS.
All works as intended, the single problem is that, in order to access the internet, the user should set his proxy manually.
Is there a way to edit the wifi profiles applied by adding a proxy setting?
Thanks in advance!
09-04-2013 07:40 AM
If your existing network topology requires you to use a proxy for Cisco ISE, to access external resources (like www.perfigo.com, the remote download site where you can find client provisioning and
posture-related resources), you can use the Cisco ISE user interface to specify proxy properties.
For more configurations, please check the below link:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_admin.pdf
09-04-2013 07:50 AM
The proxy should be set on the client devices (smartphone/tablet/laptop), not on the ISE. I am aware of the proxy setting for Cisco ISE, we already use it.
My question was about automatically setting the proxy on the iPhones/Androids that connect to my wireless network.
09-04-2013 08:21 AM
Hi,
When using supplicant provisioning you can only set the wireless connection settings, you can not modify or set any proxy settings with ISE. You will need a separate MDM solution for that to work. You can consider using a transparent proxy which is a separate product i.e the Cisco Web Security Appilance.
Tarik Admani
*Please rate helpful posts*
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide