cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

528
Views
0
Helpful
2
Replies

ISE with Cisco 2950G//SNMP COA

Hi Team,

In network where cisco old switches like 2950G is there , how can we deployed ISE.

Even the new cisco ISE 2.3 doesnt need redirect, there are concerns with radius COA. Since they are not supporting Radius COA.

So we tried SNMP COA, but even that is not working.

So what are the alternatives.

Regards

hasitha

1 ACCEPTED SOLUTION

Accepted Solutions

Bit of clarification...

There is no defect on Cisco switches.  The manner in which SNMP CoA was originally implemented was to send both port down and up in a single SNMP request.  The Cisco switches are actually a bit more intelligent and logic states "only apply the last change for same SNMP object".  The resolution is to provide option to send separate shut/no-shut directives to switch.  This enhancement is coming in ISE 2.4.

View solution in original post

2 REPLIES 2
Nidhi
Cisco Employee

Due to a defect on Cisco switches, SNMP coa is currently not supported.

Expecting a fix soon for this.

Thanks,

Nidhi

Bit of clarification...

There is no defect on Cisco switches.  The manner in which SNMP CoA was originally implemented was to send both port down and up in a single SNMP request.  The Cisco switches are actually a bit more intelligent and logic states "only apply the last change for same SNMP object".  The resolution is to provide option to send separate shut/no-shut directives to switch.  This enhancement is coming in ISE 2.4.

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube