02-24-2020 11:43 PM
login into sponsor portal with AD failed , In report - sponsor audit and login it shows failed reason as a - NO_SPONSOR_GROUP_MEMBERSHIP. But i have already assigned AD group into sponsor group where the admin belongs to and also the AD group has been added into AD -Groups field.
can suggest what could should be done?
when i created internal user with AD password then can able to login into sponsor portal but direct AD integration failed.
Solved! Go to Solution.
02-27-2020 07:39 AM
02-26-2020 03:21 AM
i assume you have an identity source sequence that involves the correct AD join point(s) in which the user resides?
Depending on the version of ISE (and bugs) I have experienced a case where the PSN was not getting the config from the PAN. It meant that I was configuring until I was blue in the face, but my results were always the same. I had to do a manual sync and then the PSN suddenly did what it was supposed to.
You might want to share your config via screenshots and we can try help you
02-27-2020 07:38 AM
02-26-2020 05:15 AM
Hi,
If your config is good and AD authentication works, the first thing i would do is apply the latest patch to ISE.
Regards,
Cristian Matei.
02-27-2020 07:33 AM
I agree with Arne that more details are needed.
You may want to call TAC rather than troubleshooting in the forum.
02-27-2020 07:39 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide