03-26-2014 08:26 AM - edited 02-21-2020 10:29 AM
04-17-2014 02:01 AM
Hi
Its sounds like it maybe an extra config or box to x cisco have added to the software have you looked the web page on the wlc to see if a time out box which is now been add and may need you set a time-out for users.
09-09-2014 05:39 PM
Hi,
You can reach out to our Cisco Technical Assistance Center (TAC) for help with the issue you have reported. Please check if you have a Cisco contract such as SMARTnet or Cisco Software Application Support (SAS) Service is required to be able to be covered by TAC.
You can contact the Cisco Technical Assistance Center (TAC) in one of the following ways:
•Online: http://www.cisco.com/tac/
•E-mail: tac@cisco.com
•Phone: North America 800-553-2447 | Australia 1-800-805-227 | Europe 32-2-704-5555 | Asia-Pacific 61-2-8446-7411 | UK 0800-404-7778
Please see the following URL for other contact numbers:
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html
If you don't have a Cisco contract such as SMARTnet or Cisco Software Application Support (SAS) Service to be able to be covered by TAC, you can post your question to the Cisco Support Community website (https://supportforums.cisco.com/) and somebody will assist you with your questions.
I appreciate this opportunity to assist you and I do hope the information I sent you pointed you to the right direction.
Best regards,
"Nilz"
Nilo Noguera
.:|:.:|:. Specialist, Cisco Global Virtual Engineering - Cisco Partner Help
http://www.cisco.com/web/partners/tools/ph.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide