09-29-2021 04:21 AM
Hi all,
I have a fully functional Template script getting the policy on ISE and applying it on switchport. Follow the script:
!
template neat-aps2802
switchport trunk native vlan 1123
switchport mode trunk
description ACCESS_POINT
!
Is it possible to receive the device name or device description registered in the Endpoint ISE attributes through RADIUS variable to the description? Here's an example of what I need.
!
template neat-aps2802
description $devicename
switchport trunk native vlan 1123
switchport mode trunk
description ACCESS_POINT
!
09-29-2021 05:10 PM
No, but if you could spare some VLANs, you can name the VLANs as device name and have it sent via RADIUS to ISE:
10-01-2021 11:55 AM
I have 50 VLANs and approximately 600 Endpoints. I need something more specific, using the VLAN with a common name to all of the same VLAN makes my routine very laborious.
I've already thought about Template NEAT interface where the description calls some kind of script that takes the InternalEndpoint.Description and passes it as a parameter, even more without success.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide