05-01-2001 03:03 PM - edited 02-21-2020 09:56 AM
I configured acs to authent. all inbound connections, but when I try to use lotes notes coming through the firewall it doesn't prompt for a password and it gives me this error "Network error: Buffer was too small." Also I need to allow email to the smtp server. I tried using the exclude command, but that's not working. I'm using Tacacs+ on secure ACS v2.6 and a PIX 520 running 5.2(1). Any help would be greatly appreciated. Thanks
John Poulos
Systems Engineer
05-07-2001 07:02 AM
The PIX only supports authentication on FTP, Telnet and HTTP so notes and smtp wont work. If you use the aaa authen any command all other ports will be blocked until you authenticate with one of those three methods. You need to use the aaa exclude inbound command to bypass authentication to those servers AND make sure to wr mem reload or at least cl uauth after doing so.
05-08-2001 08:38 AM
Thanks for your post. I finally figured it out. I am going to have my remote users go to the intranet page, where they will be authenticated(http), and then they can get their Lotus Notes. My new problem is my VPN people are getting authenticated, but their are not getting accounted. No info on them being logged to the AAA server. Any ideas. Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide