Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I can't get the tunnel to come up on the ISDN link. I've tested my configs locally and it works when I apply the crypto map to the ethernet int. But when I connect to the internet using an ISDN connection and applying the crypto map to the dialer1 in...
I currently have my pix setup for VPN, I want to add an ipsec tunnel to another pix. When I try and add the "crypto map newmap 10 ipsec-isakmp", I lose ALL connections through my firewall. When I add "crypto map newmap 30 ipsec-isakmp" the pix takes ...
I am trying to use the "aaa authentication ppp default group xxxx none" so that users are authenticated to the radius server, but if the server is down then it will authenticate everyone at the router(the "none" command). This works on my as5200 and ...
I set up a gre tunnel from a router outside the firewall to one behind the firewall. When I ping from one side to the other the pings go through for a little bit then stop for a couple seconds, then start again. I can give more info if anybody wants ...
I need to set up a GRE tunnel through the PIX. It should be pretty easy, but I am having problems. Does anybody have documentation they can post?? Thanks in advance.JPoulos
the IOS actually did that automatically when I applied the crypto map to the dialer1 interface. My problem ended up being a misconfigured access-list. Thanks for your help
I am trying to do this without a VPN and I can't get it to work. My callmanger is behind a firewall. I opened a port to allow the phone to connect. The problem is that the TFTP server sends the phone the internal ip of the callmanager. How can I ove...
We know that we are using the full bandwidth of our T1 to the internet, but we are trying to figure out how much each enduser is affected by more people logging in and using the line. For example, Your office computer downloads files slower at 10am t...
I tried this, and it I am still having the problem. I am also not that worried about the AAA because I can't even type in my password, I never get prompted. Thanks for the help though.Jpoulos
