11-09-2018 03:48 AM
Hi,
please can you help me with the following questions:
1) Is it possible to sell the SNS-3515 or SNS3595 without software?
2) Which is the recommended UCS C220-M5 (CPUs, Memory,Disk) to have the same HW as SNS-3515 or SNS3595?
Thanks,
Joao Cardana
Solved! Go to Solution.
11-09-2018 04:51 AM
11-11-2018 01:40 PM
11-09-2018 03:52 AM
11-09-2018 04:51 AM
11-09-2018 06:29 AM
Hi,
the customer has the follwoing deployement of ISE version 1.20.899 with 6,000 Users and wants to migrate to 2.x.
This current deployement is supported in 4xUCS C200-M2 servers with 4xVMs ISE-VM-K9 with Geo-Redundancy in this case 2 per site.
1) Customer wants to know which is the recommended UCS-C220 M5 to support such environment.
2) Based in the ISE Tool I verified that is necessary 2xSNS-3515, based on this I asked which is the recommended UCS Server
to support the 2xVMs to address these requirements.
3) Or if is it possible customer can order the SNS-3515 but without software.
Please, can you give me some guidance.
Thanks,
Joao Cardana
11-09-2018 07:45 AM
What is the difference between a pure UCS and SNS appliances? Just a signature in BIOS or something more?
11-09-2018 09:54 AM
11-11-2018 08:41 AM
Hi,
so, based in the fololwing information about current instalation:
The customer has the follwoing deployement of ISE version 1.20.899 with 6,000 Users and wants to migrate to 2.x.
This current deployement is supported in 4xUCS C200-M2 servers with 4xVMs ISE-VM-K9 with Geo-Redundancy in this case 2 per site.
1) Customer wants to know which is the recommended UCS-C220 M5 to support such environment.
2) Based in the ISE Tool I verified that is necessary 2xSNS-3515, based on this I asked which is the recommended UCS Server
to support the 2xVMs to address these requirements.
3) Or if is it possible customer can order the SNS-3515 but without software?
Thanks,
Joao Cardana
11-11-2018 09:40 AM
11-11-2018 10:32 AM
Hi Jason,
the request is only to upgrade from 1.2 to 2.x and also the UCS Servers,
which is your advice?
Thanks,
Joao Cardana
11-11-2018 10:33 AM
Hi Jason,
the request is only to upgrade from 1.2 to 2.x and also the UCS Servers,
which is your advice?
Thanks,
Joao Cardana
11-11-2018 01:40 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide