ā08-21-2013 07:34 AM - edited ā03-10-2019 08:48 PM
Hello,
It is clear that ISE is able to send SNMP traps to a remote SNMP manager machine. It seems to be embeded on Cisco Application Deployment Engine (ADE) OS and explained on this documentation:
http://www.cisco.com/en/US/partner/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html#wp1014133
However it is not clear if ISE machines, regardless service persona type installed, will repond to SNMP queries coming from a remote SNMP manager.
Will ISE appliances respond to SNMP queries, provided SNMP configuration is fine on ADE OS ??
I would like to have a remote NOC to monitor first if ISE machine is up/down before a potential remote login on ISE for further troubleshhoting.
Thanks in advance for your help.
Jorge Mendes
ā08-21-2013 09:42 AM
the comminity should be read only.
and you can do an snmp walk to check the information.
ISE will also send out trap when certain event happens, like boot up, interface up/down, etc.
Sent from Cisco Technical Support iPad App
ā08-21-2013 11:57 AM
Solution
Yes ISE will reponsed to the query and A similar query is already discussed on the following page with solution to what is asked
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide