Network Devices

Branch Router(cisco ISR4321/K9) is currently working on secondary link and the primary interface is having issue. After taking console of the router we found there was logs getting generated continuously saying serial 1/0/1 is down and serial 1/0/1 i...

I am trying to troubleshoot a Modbus TCP gateway that has been working for years.  In the last few months, we have been getting very few readings from any of the clients on this gateway.    I have tried replacing the gateway with an identical device ...

Olá, Estou a iniciar estudos de rede usando um switch CISCO 2960. Nesse switch coloquei a porta 13 na VLAN13, a porta 15 na VLAN15 e a porta 24 fazendo o uplink para o modem/router da minha casa, logo, estando na VLAN 1. No entanto os computadores qu...

This must a wrong picture there. Or?   https://www.cisco.com/c/en/us/support/switches/nexus-2232pp-10ge-fabric-extender/model.html

Hi, Everyone I'm Configuring ASR 9000 with Cisco Build and price tool. I select Line Card A9K-48X10GE-1G-SE and there was no GLC-TE module listed for select. On the Datasheet there is no GLC-T either.(Below Link) https://www.cisco.com/c/en/us/product...

Hi,   I need a Cisco router/ modem which supports NBN. Currently, I have Cisco small business 500 series which are deployed in four locations and connected with VPN by ADSL connection.   Is anyone know about NBN compatible modem/ router?   Regards   

We bought and ISR 4331 performance license and using PAK i converted it to .Lic file but while creating license file i entered wrong UDI, means one word was left in coping it, now when i apply this license it is showing error that UDI does not match....

We are trying to deploy Cisco CSR 1000v. Although we are in conversation with Azure Support Team, there seems to be one query they are not aware of.   When we create Cisco CSR 1000v 2 NIC's in Azure it creates 2 subnets.  If anyone could, we needed h...

Does any one know when Cisco Aironet 2802i USB port will be enable?

Hi Guys,I'm need of the  script in python to use as inventory, the aims is collect basics information's like sh inventory, sh version, etc of all equipment's in the network using sh cdp detail command to connect automatically and make a parsing of th...

Hi ALLI am new to the netconf Yang interface and  I trying to configure a ASR9010 (5.3.4) via Netconf Yang interface.I manage to get pass the initial Hello Messages but I get the following error when I try to enable something Simple like YANG cdpNETF...

Hi all,I am learning about pnp and the instructions says to follow:Visit https://developer.cisco.com/site/open-plug-n-play/Click on Sandbox -> Get Started ->OpenPnP->ReserveI cannot find the pnp labs on developer.cisco.com. Has it been discontinued?t...

I tried to install the demo image SCDemoVM on an ASR1001-X with default hardware.8 GB on the built-in route processor on the Cisco ASR 1001, 1001-X and 1002-X, partitioned: 1 GB for bootflash; 7 GB for mass storageAt install time I recognized that ev...