Hi All,I am trying to use common openconfig interface to configure both IOS XE and IOS XR. I created a template and used Nornir_scrapli to push the config. The IOS XE was successful after deploying the config but XR 6.3.1, although it configured the ...
Forum Posts
Hi everyone, I'm trying to build an auto testing frame, by looping pcap files and parsing data locally via exanic x10 device.I have successfully dumped pcap files by commands like "exanic-capture -i exanic0:0 -w foo.pcap", but when I tried to replay ...
Unable to execute python3 ncclient connection to cisco ios xr router. its working with only look_for_keys=False option .Need to check without look_for_keys=FalsePlease do the needful.Thanks Jay
Hello , i am tryingto download configuration from Cisco FTD with ansible with ftd_file_download module. i am getting following error: ansible.module_utils.connection.ConnectionError: Ansible could not determine the API token path automatically. Ple...
I am going thru the DEVASC learning path in Cisco U and under DevNet Developer Resources there is a section that says we should go to developer.cisco.com because we will find all sorts of information there. In particular there is this bit:So i regist...
Getting below error while using https://developer.cisco.com/learning Please suggest there is new web url
When attempting to accelerate a daemon process using a k3p-s(X25) device(exasock ./daemon), it was observed that the acceleration did not take effect, as exasock-stat could not see the connection status. However, when changed to a console program, th...
Hello everyone, could any one tell me, please, in which YANG model i can check the output of "show policy-map type epbr" information. I should gather input and output information through NETCONF YANGSUITE. Thank you in advance
Hi,I tried to launch sandbox few weeks back,then I tried to launch IOS XE on Cat8kv,which opened for me after couple of attempts.Again I tried to launch it but I couldn't,because the launch button is disabled as it reached maximim no,of connections t...
Respected Members,I am using dual Exanic X-25 cards one for two interactive[TCP] connections on individual port and one for Multicast data only. I have attached hardware ,firmaware report and pcap file of both the ports in zip file.I am facing retran...
Has anyone encountered an increase in data penetration latency when using exasock for transparent acceleration on a k3p-s(X25) device?The background of the issue is as follows: I am using a third-party service's dynamic library to send network data t...
I have been trying to collect telemetry data and I am getting a hard time obtaining power data.Here's a sample telemetry collector config (telegraf):```[[inputs.gnmi]]name_prefix = "app.company.network.device."addresses = ["${HOST_ADDRESS}"]username ...
I have been comparing the latency performance of the K3P-Q (x100) vs the K35-Q (x40) cards on our systems using the exanic_perf_test application in loopback mode. While the stock image of the K3P-Q has lower latency than the K35-Q, I am finding that ...
Hello,I am trying to preload a number of packages to the exanic card, and send them sequentially (in a for loop). I am using the example given here:https://github.com/cisco/exanic-software/blob/master/examples/exasock/tcp-preload-slot.cHowever, from ...
Hello i want to parse transceiver information from switches via genie but i can't get structured data except "show interfaces transceiver" command and it only works for 9300 model not for likes of 3650 or 2960 series. Commands like;show interfaces tr...
