08-12-2021 11:41 AM - modifié 08-12-2021 12:09 PM
Hi,
I connect 2 FRP4115 (with 40G modules) to the N9K-C9364C-GX switches. 8 QSFP-40G-CR4(original transceiver) for the cluster.I set the speed 40g, full duplex and off negotiation. fxos - 2.10(1.159) on frp. nxos - 9.3.3 on sw.
the switches are located in the same vpc domain. on switches, the 1st quad(1-4 eth) is used. all ports with the status - "Link not connected"
please help.
thx
le 08-12-2021 11:43 AM
le 08-12-2021 01:51 PM
I will start with Physical Patch - Twisting the Fibre Leads.
check the interface admin up, (both FP, Nexus)
can you post nexus side show interface eth1/1 (if they are in port-channel) show port-channel summary port-channel X output.
08-13-2021 02:13 AM - modifié 08-13-2021 02:16 AM
Découvrez et enregistrez vos notes préférées. Revenez pour trouver les réponses d'experts, des guides étape par étape, des sujets récents et bien plus encore.
Êtes-vous nouveau ici? Commencez par ces conseils. Comment utiliser la communauté Guide pour les nouveaux membres