08-22-2019 12:33 PM
I am running an ansible playbook to pull running configs of my switches. I do get this to work but my output has many lines of ! that I want to eliminate.
Does ios_command have something build into for this filtering? I have written this yml but doesn't seem to work.
--- - name: show version and other user level commands hosts: IOL_Routers gather_facts: false connection: network_cli become: yes tasks: - name: run multiple commands on remote nodes ios_command: commands: - show run register: print_output - name: result of running commands above - debug: msg: "{{ print_output.stdout_lines | reject('equalto', '!') | list }}"
ansible-playbook showrunrv1.yml -u cisco -k
SSH password:
PLAY [show version and other user level commands] ************************************************************************************************************************************************************************************
TASK [run multiple commands on remote nodes] *****************************************************************************************************************************************************************************************
ok: [R03]
ok: [R02]
ok: [R01]
ok: [R04]
TASK [result of running commands above] **********************************************************************************************************************************************************************************************
ok: [R02] => {
"msg": [
[
"Building configuration...",
"",
"Current configuration : 1075 bytes",
"!",
"! Last configuration change at 18:03:17 EET Thu Aug 22 2019 by cisco",
"!",
"version 15.4",
"service timestamps debug datetime msec",
"service timestamps log datetime msec",
"no service password-encryption",
"!",
"hostname R02",
"!",
"boot-start-marker",
"boot-end-marker",
"!",
"aqm-register-fnf",
"!",
"!",
"no aaa new-model",
"clock timezone EET 2 0",
"mmi polling-interval 60",
"no mmi auto-configure",
"no mmi pvc",
"mmi snmp-timeout 180",
"!",
"!",
"!",
"!",
"!",
"!",
"",
"",
"!",
"!",
"!",
"!",
"ip domain name lab.net",
"ip cef",
"no ipv6 cef",
"!",
"multilink bundle-name authenticated",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"username cisco privilege 15 password 0 cisco",
"!",
"redundancy",
"!",
"!",
"! ",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"interface Ethernet0/0",
" ip address 10.20.250.101 255.255.255.0",
"!",
"interface Ethernet0/1",
" no ip address",
" shutdown",
"!",
"interface Ethernet0/2",
" no ip address",
" shutdown",
"!",
"interface Ethernet0/3",
" no ip address",
" shutdown",
"!",
"ip forward-protocol nd",
"!",
"!",
"no ip http server",
"no ip http secure-server",
"ip route 0.0.0.0 0.0.0.0 10.20.250.1",
"!",
"!",
"snmp-server location EveLab",
"!",
"!",
"control-plane",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"!",
"line con 0",
" logging synchronous",
"line aux 0",
"line vty 0 4",
" login local",
" transport input ssh",
"!",
"!",
"end"
]
]
}
Solved! Go to Solution.
08-23-2019 06:07 AM
If you don't want any "!" in the output use show run | exclude ! it should only provide the running-config without all of the ! padding.
08-23-2019 06:07 AM
If you don't want any "!" in the output use show run | exclude ! it should only provide the running-config without all of the ! padding.
08-23-2019 07:05 AM
Well that was much easier than creating a filter on the output.
Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: