09-24-2014 07:35 AM
Is it OK to proceed this update in one step? From 12.2(25)SEE3 to the current release, 12.2(55)?
Are there any steps necessary in between like do an upgrade to an earlier version before?
Thank you for your advice.
fuz
Solved! Go to Solution.
09-24-2014 08:37 AM
Switches ideally have an smooth upgrade experience and there's isn't too much to consider before upgrade, as anyways this is not major upgrade like on 15.x.
15.x have a new licensing and feature set activation changes which needs attention. Here you should be able to upgrade from to 12.2(55) with the basic upgrade procedure.
For more details check the release notes, where too i dont think anything is specific to this HW, needs to be concerned:
-Thanks
Vinod
09-24-2014 08:37 AM
Switches ideally have an smooth upgrade experience and there's isn't too much to consider before upgrade, as anyways this is not major upgrade like on 15.x.
15.x have a new licensing and feature set activation changes which needs attention. Here you should be able to upgrade from to 12.2(55) with the basic upgrade procedure.
For more details check the release notes, where too i dont think anything is specific to this HW, needs to be concerned:
-Thanks
Vinod
09-26-2014 01:04 AM
I did it and it worked. Your advice has taken my fear away.
Thank you.
fuz
09-26-2014 01:23 AM
Glad to know it worked and I could help!
-Thanks
Vinod
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide