01-22-2021 05:05 AM
kindly i have problem that switch C9500-32QC that is working as border in SDA is reloaded without any reason or loggs , so kindly share your experience if you faced a similar problem
all switches on the same rack are working fine
------------------------------------------------
Border-SW uptime is 1 hour, 28 minutes
Uptime for this control processor is 1 hour, 29 minutes
System returned to ROM by PowerOn
System image file is "bootflash:cat9k_iosxe.16.12.03s.SPA.bin"
Last reload reason: PowerOn
--------------------------------------
KSU-SH-Border1-SW#show power
Power Fan States
Supply Model No Type Capacity Status 0 1
------ -------------------- ---- -------- --------- -----------
PS0 C9K-PWR-650WAC-R AC 650 W ok good N/A
PS1 C9K-PWR-650WAC-R AC 650 W ok good N/A
Fan Fan States
Tray Status 0 1 2 3
------ ---------- -----------------------
FM0 ok good good good good
FM1 ok good good good good
KSU-SH-Border1-SW#
01-22-2021 05:42 AM
sh log on switch act up detail
01-22-2021 07:13 AM
>Last reload reason: PowerOn
That 'still' indicates a power problem , either internally or external
M.
01-22-2021 08:35 AM
Do you have any crash logs in the flash to look.
Also look at the bug - may be effected your device :
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvr77861/?rfs=iqvred
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide