01-18-2020 11:54 AM
I have a configured and operational Cisco 2951 with an Etherswitch module (SM-ES3-24-P.) When I connect to the console port for the router however I am connected to a session in the Etherswitch and have no option to terminate the connection and console into the router. I have tried both "CTRL+SHIFT+6+ then X" as well as the disconnect command and neither have given me access to the router through the console port.
Am I missing something? Is there a reason that I can't access the router through its own console port?
Solved! Go to Solution.
01-19-2020 11:18 AM
01-18-2020 01:11 PM
what terminal software are you using Putty or Secure CRT or any other?
here is the good steps to access module : please post the logs you entered on the console :
01-19-2020 11:18 AM
02-16-2020 03:05 PM
Ended up rebooting the device and I was able to console into the router from the console port. Thank you for the help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide