11-23-2016 01:17 PM
Hi Guys;
I am performing an upgrade from 3.0 to 3.1 but I am running into some issues, the file has copied across from the FTP server onto Prime but when I go to upgrade the system -
using the following command (#####/admin# application upgrade PI-Upgrade-3.0.X_to_3.1.0.0.132.tar.gz defaultRepo)
I get the following error:
Stage 3 of 7: Executing pre-install ...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
System will reboot a few times to complete the upgrade process.
Please monitor the upgrade progress from the system console.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ERROR : Please run the application upgrade from the system console to
monitor upgrade progress. Use system monitor, serial terminal or a virtual console
to initiate the upgrade.
WARNING : It is strongly recommended to copy the latest backups to an
external repository before proceeding with the upgrade.
% Pre-install step failed. Please check the logs for more details.
The following is in the logs:
debugd[5850]: [22176]: application:install install_cli.c[218] [admin]: Error while Installing - A
pplication bundle: PI-Upgrade-3.0.X_to_3.1.0.0.132.tar.gz Repository: defaultRepo ErrorCode: -635
Any help appreciated.
11-23-2016 06:14 PM
You cannot do the 3.0- to 3.1 upgrade from an normal ssh session.
You need to be on the physical console port (for hardware appliance) or Vsphere client console connection (virtual machine appliance).
Cisco says they require this because the OS is being upgraded; but they have other product upgrades that upgrade the OS as well and don't require it. (For example ISE which also runs on ADE-OS with Linux underneath.)
04-11-2017 01:32 AM
Hi,
I had exactly same issue when i tried to upgrade from 3.0 to 3.1.
so i tried to upgrade from virtual machine console but the problem is when i try to upgrade from virtual machine console it's doesn't recognize the installations files saved on /localedisk/defaulrepo
if i SSH to CPI and run the command as below then i can see all the files but if i do the same command via virtual machine console it's says "% repository is empty".
cpi01/admin# show repository defaultRepo
DigiCertCA.crt
PI-Upgrade-3.0.0.0.78.tar.gz
PI-Upgrade-3.0.X_to_3.1.0.0.132.tar.gz
TrustedRoot.crt
When i try to upgrade even though repository is empy
application upgrade PI-Upgrade-3.0.X_to_3.1.0.0.132.tar.gz defaultRepo
it's says "%Locale file not found"
When i try to jump into box via root and check the files are on /localedisk/defaultRepo it's show nothing...
I have tried following but without success:
reboot entire Box
stop /start NCS
Any idea how to solve this problem?
Thanks in advance!
Best Regards,
Ranjan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide