cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2048
Views
0
Helpful
1
Replies

Cisco 3660 Flash problem

mounir.mohamed
Level 7
Level 7

HI,

My router C3660 rebooting itself a lot of times and it's give me the following error, so please could any one help about the cause of this error

I think it's Flash problem or damged image is that right.

$$ show ver

monitor: command "show" not found

$$

$$

$$

$$

$$

$$

$$

$$ reset

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

C3660 processor with 131072 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

program load complete, entry point: 0x80008000, size: 0xcc78d4

Self decompressing the image : ##########

Error : Uncompression of the image failed.

invalid compressed data--format violated

Error : zip decompress failed

*** System received a Software forced crash ***

signal= 0x17, code= 0x7, context= 0x80020b00

PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

C3660 processor with 131072 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

program load complete, entry point: 0x80008000, size: 0xcc78d4

Error : compressed image checksum is incorrect 0x7B39289E

Expected a checksum of 0x7B397B59

*** System received a Software forced crash ***

signal= 0x17, code= 0x5, context= 0x80020b00

PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

C3660 processor with 131072 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

PCMCIA Slot1: No Card Present

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

C3660 processor with 131072 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

program load complete, entry point: 0x80008000, size: 0xcc78d4

Self decompressing the image : ###########

Error : Uncompression of the image failed.

invalid compressed data--format violated

Error : zip decompress failed

*** System received a Software forced crash ***

signal= 0x17, code= 0x7, context= 0x80020b00

PC = 0x800080d4, Cause = 0x20, Status Reg = 0x3041f003

System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

C3660 processor with 131072 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

$$

1 Reply 1

nhabib
Level 9
Level 9

Looks like the image you have loaded is corrupt

You will probably have to transfer it again:

http://www.cisco.com/warp/public/130/xmodem_generic.html

http://www.cisco.com/warp/public/701/59.html#rommon1

Review Cisco Networking for a $25 gift card