Cisco 3945 ISR MIB

[daebischer]

We are developing a prognostics model for ISRs. I need some assistance in finding specific OIDs for the following SNMP variables on the 3945 ISR:

Inlet air temperature

Core Temperature

Outlet Temperature

Packet Receive Rate

Thank you!

[balaji.bandi · Accepted solution]

May be check below OID browser :

example for temperature :

https://snmp.cloudapps.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.13.1.3.1.6&translate=Translate&submitValue=SUBMIT

[daebischer]

This is helpful but I need the OID for actual value of those three temperature points (in Degrees C) and not the state.

[balaji.bandi]

Do snmpwalk - 1.3.6.1.4.1.9.9.13.1.3 you see the information (do not have top of my head to give exact information)

[Georg Pauwen]

Hello,

I guess you have found that out already, but if you want to retrieve table entries from 1.3.6.1.4.1.9.9.13.1.3 , you need to append an index to the OID.

[daebischer]

Thank you!!