Network Management

I have an interface on a IOS-XR router that I am trying to configure using netconf. I am going through the yang models, specifically the Cisco-IOS-XR-ifmgr-cfg and looking for an option to add the second-dot1q vlan tag. I am not able to find that opt...

need help with RIP route. it does not work when I add the network 

I know zero about 5505 ASA's and my director tasked me with configuring and sending to off site location to add to the existing 2 cisco 2960S's. Can someone help me on how to config this 5505 so that it can be wired into those? 

Hi guys, I need some help here, i am troubled by the way my eem applet always seems to add 2 lines to the output of the following applet outcome: R1(config)#event manager applet testR1(config-applet)#event noneR1(config-applet)#action 0010 cli comman...

Hello All,A plan is required to build an internal network that serves 100 users in the company and is capable of future development to accommodate from 300 to 500 usersThe company is divided into five departments located in the same neighborhood. All...

We have a Cisco PIX 506E VPN/firewall for our network (e.g. 50.197.160.20 is public IP of the Cisco PIX). I have a database engine running on a PC in my private network behind the Cisco PIX 506E. I want to allow an external application on the interne...

I am using SNMP to read switch information from a Cisco 9300L Catalyst Switch and I am trying to figure out a direct reference tag/address that I can use to show the status of the two power supplies (redundant) as either On or Off. Currently I am abl...

Hi all,After spending so many hours I am quite frustrated and asking this question.. Setup: - GNS3GNS3 VM Cloud -> ASA firewall -> Ubuntu VNC clinetCloud 192.168.114.2ASA Outside 192.168.114.10ASA DMZ - 172.16.1.1DMZ (Ubuntu) - 172.16.1.2ACL - outsid...

Hi Firstly Thanks in Advanced. Does FPR-1010 support HA with pair of interface from each firewall ?It helps to avoid split brain when a failover interface / cable got break or damanged. 

Hello Everyone, Apologize if this is simple question but I've tried google but still not really understood. I would like to understand this if anyone here can enlighten me. I've managed to send routers log messages to our dedicated Syslog Server. I g...