(Config added as txt because post kept getting mark SPAM with no reason given)
Below is my full config (With passwords/IPs removed)
I have my router with a Public IP connected directly to the internet MAC bridged
(Home internet WIFI on the modem on 192.168.0.0)
My Public server is 10.0.40.252 On my DMZ2 (Nat porting only what I want to access the server)
My private network is on 10.0.10.0 255.255.255.0 (192.168.0.0 WIFI on the modem)
(Ethernet 1&2 and Vlan2&Vlan3 not in use)
#1 I need to set it up so I add a ip nat inside source static tcp 10.0.40.252 PORT interface FastEthernet4 PORT with no acces to the other networks
#2 I would like to access 10.0.40.252 from my other networks (10.0.10.0 and 192.168.0.0)
I had this set up working perfectly and my ISP changed my modem and I cant seen to get it right again. (Back up did not work)
Any security issue or improvments to my setup appreciated!
