About cgarlick1972

cgarlick1972 · 02-09-2024

I need to nat ports 7000-7500 I have done it in the past port by port using:ip nat inside source static tcp X.X.X.X 1234 interface FastEthernet4 1234Do I need to do this via ip nat or access list?

cgarlick1972 · 08-12-2017

I know my config is messy, I have tried everything I can think of to get this to work. Could someone tell me why my vlans will not route to the internet? (Also if you see anything that needs to be removed I would welcome that too) 870 Router Curre...

cgarlick1972 · 01-07-2017

I want to build a DMZ with www access, trace route suceds but I still can not access the web server Outside IP 24.49.x.x Inside 10.0.x.x DMZ 192.168.1.100 DMZ interface 192.168.1.1 I only have 1 IP for the outside interface so I have to translate to ...

cgarlick1972 · 01-07-2017

I can access my webserver from outside but not from the inside network. What will allow this?

cgarlick1972 · 01-07-2017

I think I fixed it, seems the object-group wasn't working. This statement fixed it but I would have never found it without your help! Many thanks! access-list outside_access_in extended permit tcp any 24.49.x.x 255.255.255.0 eq www

cgarlick1972 · 01-07-2017

Still getting error: TCP access denied by ACL from 10.0.0.10/55479 to inside:Outside/80 If I try to reach it from an outside network it does nothing and doesn't even show an error

Member Since	‎12-24-2016 05:32 PM
Date Last Visited	‎02-14-2024 12:05 AM
Posts	6

User Statistics

User Activity

c870 ip nat port range

Routing vlans through router

pix 515e build a DMZ for www server NAT to the web server on the DMZ interface

I can access my webserver

I think I fixed it, seems the

Still getting error: