Cisco ACE Monitoring

[pizpowergtc]

Hi,

Am receiving the below oid and I cannot translate it all..

1.3.6.1.4.1.9.9.254.0.2

This is what I can trasnlate till now:

ciscoMgmt.254.0.2

Cannot find any mib for this

Thanks,

David

[Marvin Rhoads]

It's part of the SLB (Server Load Balancing) MIB. I don't see the .2 object ID but .1 is documented here:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.dolocal=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.254.0.1#oidContent

It apears to be related to the FT (Fault Tolerance) state of the ACE:

Object	cslbxFtStateChange
OID	1.3.6.1.4.1.9.9.254.0.1
Status	current
MIB	CISCO-SLB-EXT-MIB ;   -   View Supporting Images
Trap Components	cslbxFtState
Description	"The notification generated when the Fault Tolerance process changes to a new state. The value of cslbxFtState indicates the new state."

[pizpowergtc]

yes

could it be software? or?

[Marvin Rhoads]

Assuming that logging is enabled on your ACE, I would check the ACE local log to correlate the SNMP trap with a log event.