Solved: Re: CISCO ASR-9901 Power Input, output current threshold value

andresw · ‎05-27-2022

Hi Everyone,

I have an issue with SolarWinds sensor device Cisco ASR-9901 Power Supply Input and Output current value, can anyone tell me about the Cisco ASR-9901 Power Supply Input and Output Current (A) threshold.
Here is the capture Power Supply status and SolarWinds Capture.

Thank you.

marce1000 · ‎05-27-2022

- Usually can be ignored in network management software if OK reported with manual commands on the device , can be due to bugs in SNMP , use advisory software version on the ASR for that : https://software.cisco.com/download/home/286322162/type/280805694/release/7.3.2 , you can also connect to the device (SSH) with https://cway.cisco.com/cli . at the top left press or run 'System Diagnostics'

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎05-27-2022

- Usually can be ignored in network management software if OK reported with manual commands on the device , can be due to bugs in SNMP , use advisory software version on the ASR for that : https://software.cisco.com/download/home/286322162/type/280805694/release/7.3.2 , you can also connect to the device (SSH) with https://cway.cisco.com/cli . at the top left press or run 'System Diagnostics'

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

andresw · ‎05-30-2022

Thank you @marce1000 for your advice, I was running 'System Diagnostics' with health result