Resolved! Cisco Prime - Syslog Live Steming
I am using Cisco PI 3.8. I am unable to view the live logs in Syslog Viewer. Attached is the switches configuration with this. Thanks in advance.
I am using Cisco PI 3.8. I am unable to view the live logs in Syslog Viewer. Attached is the switches configuration with this. Thanks in advance.
Hi, I currently have a problem with my console cable connection to switches. I've tried different switches and different cables and different software and it does the same on all of them.I'm using MobaTerm and Putty and I connect up fine but then whe...
After configuring all the radius setting on the switch and I get this error when I try to login with my username Username:Apr 14 06:47:56.597: AAA/BIND(00000026): Bind i/fApr 14 06:47:56.597: AAA/AUTHEN/LOGIN (00000026): Pick method list 'default'Apr...
I've got three ASR-920s, and they're all getting the same SNMP error "SNMP-3-RESPONSE DELAYED: processing percent ciscoMgmt.810.1.2.1.1 GetNext (24016 msecs) "I rebooted them, checked the processes (CPU), everything appeared to be in order, inbound/o...
Hi! So i am trying to get the AutoInstall to work on a router. I configed it to use DHCP interface GigabitEthernet0ip address dhcpduplex autospeed auto I can monitor the DHCP and see that it gets the DHCP: Scan: TFTP Server address Option: With m...
%IGMP-4-NO_INPUT: VRF DKET: IMGP packet without interface input received xxx.xxx.xxx.xxx for 224.0.1.40 This Login messages appears after I create my tunnel. This is on Cisco 3900 series router, IOS 15.7(3)M6. Can someone tell me why this logging mes...
I want any advice to get connectivity between the two, I can't seem to make it work. I will post my setup below. Here is my cloud FAN is loopback adapter, and VM network Adapter is also defined on my VMWARE connections Here are conenctions defined o...
I am working with Nexus 9k's and would like to log blocked traffic by an ACL/ACE. The 9K can reach the syslog server ip for other things like SNMP traffic (obviously a different port). I'm thinking it is something that I have incorrectly configured ...
I'm looking for a good CSV formatted file example to import wired devices into Prime Infrastructure.Thanks, rob
Hi Support, I've installed Prime Network 4.3.2 clients, but when I loggin I received this error message:org.nanode.launcher.cache.CacheError. This application will be closed. I already update java to latested version 8, update 221 (build 1.8.0_221-b1...
Hello, recently we've been dealing with WLC configuration backup issue. There are currently nine wireless LAN controllers in our deployment that are managed by Cisco Prime appliance. When we go to Monitor >>Managed Elements >>Network Devices, we can ...
Hello, Have you try to tune Catalyst 8300 platform resources? I bought this device as Internet Edge Router based on 20G throughtput, but after installing I see a lot off drops on Internet interface (up to 2Gbps traffic). IOS 17.3, CPU and memory work...
our 3.9 is up and running but we noticed when there is an alert Prime sends the email and mutes alerts for 30 mins. the rechecks and if up sends the reset alert. Is it possible to have Prime mute the alerts so we arent spammed with emails and still m...
Hi need litel bit of help im trying to get hold off Asdm For Asa 5510 v7 but no luck so is ther eny one hear who can help me Aarne
I can TFT files in and out including extracting .tar files in my router but I cannot ping my loopback adapter to which I'm connected to, nor the internet. no pingto 10.1.1.100 I can extract files from my PC from 10.1.1.100 TFTPd64 Here is my V...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-07-2024 02:30 AM | ||
08-04-2024 12:47 AM | ||
07-30-2024 11:36 PM | ||
07-30-2024 01:20 AM | ||
07-27-2024 03:25 PM |
User | Count |
---|---|
3 | |
3 | |
2 | |
2 | |
1 |