Hi
I would distribute a new ios image to Cat2960CG-8TC-L.
I have enabled "insert boot command" and Reboot Device: "Immediately.
Copy image to the device: OK
Reboot device: OK but with old image.
Job Status:
Validating device distribution context SUCCESS -
Backup of current running image c2960c405ex-universalk9-mz.122-55.EX3.bin - DISABLED
Distributing image c2960c405ex-universalk9-mz.150-2.SE4.bin using protocol TFTP SUCCESS -
Rebooting device with Image c2960c405ex-universalk9-mz.150-2.SE4.bin" SUCCESS - (Reboots with old 12.2(55) image)
So, i don't know why Cisco PI doesn't insert the boot command for the new ios image, and reboot the device with the new image.
Cisco PI:
Version : 1.3.0.20
Patch: Cisco Prime Network Control System Version: Update-1_12_for_version_1_3_0_20
Can anyone help me?
Best regards
Bernhard