cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2743
Views
10
Helpful
3
Replies

Cisco Prime 2.2 Config Archive get Partial-Success

m.o.andersson_2
Beginner
Beginner

Good morning everyone!

I have a question regarding Cisco Prime Infrastructure 2.2 and Config Archive. Im trying to backup a configuration for an old WS-CBS3020-HPQ blade with IOS version 12.2(58)SE1 and im getting an error under "Fetch vlan" that says :

Couldn't able to collect VLAN on the device. TFTP server not accessible from device.

Im not sure what this means? It gets partial-success, but the error message worries me. Im not able to find anything in the logs or by searching for the error code. Anyone have any idea where to look? The credential is correct, i tripple checked :)

1 Accepted Solution

Accepted Solutions

Hi Mattias, did you find a solution to this problem?

 

//Simon

View solution in original post

3 Replies 3

m.o.andersson_2
Beginner
Beginner

I tried using the "tftp-server flash:" command, but didnt help. Im also seeing this problem with a couple of Cisco 3750x switches.

Hi Mattias, did you find a solution to this problem?

 

//Simon

Hi SImon.

Yes i started to look further into this problem and discovered all these switches reside on a DMZ and therefore have a firewall in between. Quite simple, did not allow tftp! :D Thanks for the reply so i could dig further into the problem.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: