Cisco Prime 2.2

[reilly.john]

I am soon to be updating my Cisco WCS server to Cisco Prime 2.2

Presently the WCS is on a UCS 200 VMware 4.5 which will be decommissioned.

I can get the VMware specs on the new server and the hardware device specs. 

What I need clarification on, is there a software version to load on my own physical server other than on VMware?

What I am assuming is that the hardware device specs are for the hardware device ordered direct from Cisco.

Thanks for your help

John

[AFROJ AHMAD · Accepted solution]

Hi John,

Yes you are right.

Required Hardware

You need the following equipment to install a Cisco Prime Infrastructure appliance in an Electronics Industries Alliance (EIA) rack:

• A Cisco Prime Infrastructure appliance
• Network cables
• One rack unit (RU) free space in an EIA-standard rack
• Rack mounting kit (included with the Cisco Prime Infrastructure appliance shipment)
• A serial console cable

check  the below link::

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html#pgfId-1057848

Thanks-

Afroz

***Ratings Encourages Contributors ****

[reilly.john]

Thanks for the information.