Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a question on ISSU upgrade with the Cisco Nexus 9508 switches. I read where after version 7.0(3)I3(1) ISSU is available.Is there configuration commands in the CLI that need to be done to enable this feature? I am reading through the upgrade ...
I am trying to change the public web connection which is using the internal web auth type with just a click to accept the AUP disclaimer.
We want to use the same AUP internal page but incorporate a user name and password for the guest. And use the s...
I am soon to be updating my Cisco WCS server to Cisco Prime 2.2Presently the WCS is on a UCS 200 VMware 4.5 which will be decommissioned.I can get the VMware specs on the new server and the hardware device specs. What I need clarification on, is ther...
Trying to determine if I have any compatibility issues between my wireless WCS MSE and WLC'cWCS version 7.0.230.0 feature plusWLS version 7.6.130.0 in an HA configurationMSE version 7.0.220.0 I just recently upgraded my WLC 5508's to an HA configura...
I received a new batch of Access Point 3502i - none of them will boot up with a correct image from our controllers.I can take a spare AP I have right out of the box from a different source, and it boots up and connects fine - so I know the configura...
Attached is what I have presently for guest wireless subnet and the dhcp scope on the controller. Thanks for the link. That will help me out with the logins.
As far as the guest wifi subnet size, at present I run out of available ip's during the ...
Presently it is configured as a /20. So once I set this up. I can use about 4 /24 subnets, bundle them together in a group. Then if I run out of IP's I would just add one moe /24 subnet to the interface group.
I will that
Thanks
Sorry, we will just use 1 type of client. Presently using WebAuth where with the AUP is the standard disclaimer and then the <Accept>, what they are calling click through.
What is requested is generic log in name and password where everyone uses the...
