cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1083
Views
0
Helpful
3
Replies

Cisco Prime 3.8 + Netflow

Jay_Work
Level 1
Level 1

Hi,

We've added netflow commands to our switch and added the device data sources in Prime 3.8. They are enabled, however i'm unable to see any traffic under dashboard > performance > application. Sorry but i'm new to Netflow (Not Prime) so if anyone can advise on tips/advice of how I can get to see application flow in Prime that would be helpful?

Thanks in advance.

3 Replies 3

marce1000
VIP
VIP

 

  - Do you have Assurance  license(s) in order to be able to use Netflow ?

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Yes we have assurance licenses and I can see that Prime is using one.

 

  - Have a sanity check of the configured netflow(s) on the devices by for instance using a free Netflow-analyzer and verify if Netflow data are being received :

    (e.g.) : https://www.paessler.com/netflow_monitoring?gclid=CjwKCAiAz4b_BRBbEiwA5XlVVkw8nZ8I9Iyd7SA_c3_yF1QmDvjOBu_lBBLKhy9JPDaBsdqJYNd_HBoChasQAvD_BwE

 

 Further more verify device compatibility matrix -> pay attention to required software versions (tab 2  en tab 3) , for the devices configured in Prime. 

 https://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/prime/infrastructure/3-8/supported/devices/PI38-Supported-Device-List.xlsx

  M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Review Cisco Networking for a $25 gift card