03-11-2014 05:30 AM
Hi,
I have a quite simple question, but I really could not find the answer in docs or internet.
How do I plot a CPU history graph for my monitored router using cisco prime. All graphs that Cisco Prime shows me are lmited to 1h range!
I must be keeping the full range of data somewhere. How do I plot different ranges?
It should be a simple task: click on the graph, change time range, and 'voila'! But its not...
Solved! Go to Solution.
03-11-2014 05:33 PM
Hi,
these are system defined pollers, you can't edit or delete them ,however you can de-activate them.
Create a new poller with your selected or all of the devices and then check the issue.historical data or the reports will be avaible only after 24 hours of the poller started.
Thanks-
Afroz
**Ratings Encourages Contributors ***
03-11-2014 06:29 AM
What version of PI is it? You should check it under Reports > Device Reports.
Also, for individual devices you should check it under Operate > Device Work Center and in Device Details, click View history of CPU utilization and Memory Utilization.
-Thanks
Vinod
03-11-2014 07:25 AM
Cisco Prime - 4.2
Sorry sirs, could not find Reports > Device Reports nor Report > Report Launch Pad > Device > CPU Utilization
The closest thing I found here is
Reports > Performance > Device > CPU Utilization
But there is no Device available for me to plot! Do I have to enable CPU collection for long range graphs? Do I have to create a poll or something like that? It does not stores all values automatically?
03-11-2014 08:37 AM
Hi ,
we thought ,it is Prime infrastructure .
yes , you need to created the Poller first then you will be able see result on the dasohboad as well you can generate reports based on that.
Monitor > Performance Settings > Setup > Pollers
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-2/user/guide/lms_monitor/lms_mnt/mnt-perf.html#wp1542387
Thanks-
Afroz
Do Rate the Post
***Ratings Encourages Contributors ***
03-11-2014 11:08 AM
Great! Now I am mounting the puzzle!
In "Monitor > Performance Settings > Setup > Pollers" I have "All Devices_CPU Utilizaton" Poller, which seems to be created by Cisco since I cannot delete or edit it.
The status of this poller is "Active with Errors (29)". I have 200 devices, so 29 errors is not a big deal now.
So, I went to "Reports > Performance > Poller" and ran a Report for "All Devices_CPU Utilizaton" in the range of 1 week. The result was:
"Could not generate the report. Either data is not available for the specified duration or the report job has failed."
Status | |
Job Status: | Partially Successful |
Job Failure Reason (if any): | No data to generate the report |
Completion Time: | Tue, Mar 11 2014, 15:05:33 BRT |
Launch Report: | click here |
Strange! And how long is the retention period for this collected data? Where do I configure it?
03-11-2014 05:33 PM
Hi,
these are system defined pollers, you can't edit or delete them ,however you can de-activate them.
Create a new poller with your selected or all of the devices and then check the issue.historical data or the reports will be avaible only after 24 hours of the poller started.
Thanks-
Afroz
**Ratings Encourages Contributors ***
03-11-2014 06:57 AM
Hi Leonardo,
More specificly it is under (Report > Report Launch Pad > Device > CPU Utilization )
Thanks-
Afroz
***Ratings Encourages Contributors ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide