Cisco Prime Infrastructure 1.1

[Vikas Gundu]

Hi Team,

 I have a doubt for version PI-1.1.

PI 1.1 is installed on the VMware i.e. on the virtual platform

The customer has bought the following:

R-PI-1.1-K9 ------Cisco Prime Infrastructure 1.1

R-PI-1.1-100-K9-----Prime Infrastructure 1.1 Software - 100 Device Base Lic 

L-PILMS42-100------------- Prime Infrastructure LMS 4.2 - 100 Device Base Lic

L-PINCS11-100------------- Prime Infrastructure NCS 1.1 - 100 Device Base Lic

L-PINCSW11-100---------- Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic 

As it is the 1.1 there is no lifecycle and assurance licenses. 

Currently L-PINCS11-100 is installed on the server.

How do I install L-PINCSW11-100 and L-PILMS42-100.

Can this both licenses be installed on the same server or do they need additional server.

Thanks in advance..

[Vinod Arya]

These are separate licenses. L-PINCSW11 is used for NCS whereas L-PILMS42-100 is applied on Ciscoworks LMS.

As PI 1.1 was the initial release where Cisco combined two individual monitoring applications : Network Control System (NCS) for wireless infrastructure and Ciscoworks LAN Management Solution (LMS) for wired infrastructure together, and hence has some issues with features and user experience. So Cisco gave additional licenses for NCS and LMS, for those customers who still wanted those applications separately. 

You can use them if you want to use them separately.

-Thanks

Vinod

**Encourage Contributors. RATE Them.**

[Vikas Gundu]

there is only 1 license has been installed. Customer wants remaining 2 licenses(L-PILMS42-100 &  L-PINCSW11-100) to be installed on the server.

Is it possible to install on same server??

Do you need additional server for it..

[Vinod Arya]

They are other applications, and need to be installed on new server's.

In short previously there was two applications :

NCS and LMS

Now:

NCS+LMS = CPI

All three of them have separate license.

-Thanks

Vinod

**Encourage Contributors. RATE Them.**

[Vikas Gundu]

Thanks Vinod....

But still confused..:(

correct me if i'm wrong

On 1 server you need to install 

R-PI-1.1-K9 ------Cisco Prime Infrastructure 1.1

R-PI-1.1-100-K9-----Prime Infrastructure 1.1 Software - 100 Device Base Lic 

L-PILMS42-100------------- Prime Infrastructure LMS 4.2 - 100 Device Base Lic

and on 2nd server u need to install

R-PI-1.1-K9 ------Cisco Prime Infrastructure 1.1

R-PI-1.1-100-K9-----Prime Infrastructure 1.1 Software - 100 Device Base Lic 

L-PINCS11-100------------- Prime Infrastructure NCS 1.1 - 100 Device Base Lic

L-PINCSW11-100---------- Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic 

Is it correct????

[Vinod Arya]

If you install PI 1.1 you need a base licence. You must have a single base license to run the software. The base license here is R-PI-1.1-K9.

After this you need a Device license which decides how many devices you can manage on your application. Here Device Base License is R-PI-1.1-100-K9 which is Cisco Prime Infrastructure 1.1 Software - 100 Device Base License.

So to run your Cisco Prime Infra 1.1 you need only these two licenses (more if you want to manage more that 100 device - using add-on license).

You can check CPI 1.1 License guide here.

So server 1 = CPI 1.1 :

R-PI-1.1-K9 ------Cisco Prime Infrastructure 1.1

R-PI-1.1-100-K9-----Prime Infrastructure 1.1 Software - 100 Device Base Lic 

Other Server's, if you want these applications:

1 for = NCS Application/software (L-PINCS11-100)

1 for Ciscoworks LMS application/software (L-PINCSW11-100)

-Thanks

Vinod

**Encourage Contributors. RATE Them.**

[Vikas Gundu]

Thanks Vinod...