02-06-2014 02:11 AM
Hi,
Since this week I am evaluating Cisco Prime Infrastructure 2 and I have a few questions:
- Some configuration rules are mandatory. Is it possible to run custom compliance reports with a custom baseline template? Where/how can I make a baseline template?
- Where can I find EOL/EOS information for our devices?
Thanks in advance,
Marnix
Solved! Go to Solution.
02-06-2014 04:39 AM
Hi Marnix,
unfortunately , you can't create custome reports in PI yet , planned for future release.
Baseline Templates are also not supported yet.
check the below link for feature support in PI:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
You can use cisco. com and google to know the EOS/EOL of your device.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****
02-06-2014 04:39 AM
Hi Marnix,
unfortunately , you can't create custome reports in PI yet , planned for future release.
Baseline Templates are also not supported yet.
check the below link for feature support in PI:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
You can use cisco. com and google to know the EOS/EOL of your device.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****
02-06-2014 07:16 AM
Afroz,
Thank you for your reply. We would like, if it is possible, to proactively informed when devices become EOL/EOS soon in the software. Searching EOL/EOS dates by hand is impossible when monitoring 1500+ active devices.
My questions are answered, thank you!
Marnix
02-06-2014 08:11 AM
For EoS/EoL you can load your devices into the free Cisco Active Advisor tool.
http://www.cisco.com/en/US/products/ps13221/index.html
Once you get them all loaded, you will get regular advisories on EoS/EoL and PSIRTs.
You can also use Prime LMS (separate server, license included with PI) which does generate those reports.
08-27-2014 02:51 AM
Hi There,
I'm not sure if we are talking about the same thing, but we are running Prime Infrastructure 2.0.
You have to enable compliance from the settings (restart) and if you look under Report / Report Launch Pad, in the menu on the left is Device, click on there and you will see EOX ...... I've only had a quick look at the reports, but looks to work.
HTH
Simon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide