cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Community Live
465
Views
0
Helpful
1
Replies
Soporteco
Beginner

Cisco Prime Support

Hi. Can anyone confirm if these things are supported by Cisco Prime Infrastructure 2.2:

1) Add new MIBs to some devices and create alarms so we can monitor things like Supervisor states or module states.

2) We have seen availability reports, cpu reports, memory reports, etc., but we cannot find response time reports. Is there a way to generate a report with average response time for each device?

3) Can we get information about Cisco energywise?

4) How can we schedule a backup of running-config of all the devices?. We can create a template, but how do we create a file and export it?

 

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
AFROJ AHMAD
Cisco Employee

Hi,

1. you can add MIB's to Prime Infrastructure based on the need what you want to poll.  we can never add MIBs to devices , IOS or other codes  comes pre loaded with the supported MIBS:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/user/guide/pi_ug/mon-pol-thresh.html#34113

2.I don't think , we have RTT based report available , however you can create your custom polling and generate graphs for that , it may help

3.It is not supported AFAIk.

4.check the below thread for your last query::

https://supportforums.cisco.com/discussion/12543421/extract-config-files-cisco-prime-infrastructure

 

Thanks-

Afroz

****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post

1 REPLY 1
AFROJ AHMAD
Cisco Employee

Hi,

1. you can add MIB's to Prime Infrastructure based on the need what you want to poll.  we can never add MIBs to devices , IOS or other codes  comes pre loaded with the supported MIBS:

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/user/guide/pi_ug/mon-pol-thresh.html#34113

2.I don't think , we have RTT based report available , however you can create your custom polling and generate graphs for that , it may help

3.It is not supported AFAIk.

4.check the below thread for your last query::

https://supportforums.cisco.com/discussion/12543421/extract-config-files-cisco-prime-infrastructure

 

Thanks-

Afroz

****Ratings Encourages Contributors ****

Thanks- Afroz [Do rate the useful post] ****Ratings Encourages Contributors ****

View solution in original post