Cisco Stackwise-virtual adding a Port-channel

[CraigMercer1401]

I am trying to find out how to configure a port-channel for a stackwise-virtual link, once the devices are currently in production.

I currently have 2 x C9500-24Y4C connected via 1 x 10GB Stackwise-virtual link. I would like to add a second 10GB link for redundancy and greater throughput. How do I go about configuring it? 

Regards,

Craig

[balaji.bandi · Accepted solution]

Always suggest to best practice to have 2 SVL Links, 1 DAD link

here is document :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-9/configuration_guide/ha/b_169_ha_9500_cg/configuring_cisco_stackwise_virtual.html