01-03-2014 06:16 AM
We currently use Ciscoworks LMS 4.0 with over 1000 devices in the database. I'm a LMS novice. And have been assigned the task of minimising the amount of email notification’s we receive, as if one device goes Operationally Down all devices off that switch also send alerts to the email notification group, which in turn overwhelms the mailbox.
The ports are configured not to log or send snmp traps.
no logging event link-status
no snmp trap link-status
So any advice on how we can limit these alerts being generated would be much appreciated.
Thanks in advance.
Solved! Go to Solution.
01-03-2014 08:38 AM
Hi Nessie,
Go to Monitor > Fault Settings > Setup > Fault Device Details
select the device and click on view then Click on the hyperlink or the device name\ip address
that will bring a new window from there click on Interface and chanaged the Managed state from ture to FLASE for those interfaces for which you do not want ALERTS.
Thanks-
Afroz
[Do rate the useful post]
01-03-2014 08:38 AM
Hi Nessie,
Go to Monitor > Fault Settings > Setup > Fault Device Details
select the device and click on view then Click on the hyperlink or the device name\ip address
that will bring a new window from there click on Interface and chanaged the Managed state from ture to FLASE for those interfaces for which you do not want ALERTS.
Thanks-
Afroz
[Do rate the useful post]
01-07-2014 06:07 AM
Thanks Afroz that works perfect
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide